Jump to content

Hose barb

From Wikipedia, the free encyclopedia
Look up hose barb in Wiktionary, the free dictionary.
Cross section of a Büchner flask. Note the protruding hose barb, used for attaching a vacuum source.
Aspirator with a hose barb
on the right arm
A copper aspirator. The water inlet and outlet are at the top and bottom, respectively; the air inlet is on the side.
At the top of the picture there are a dozen hose barbs (brass).

Hose barbs are cylindrical pieces or parts for attaching and securing hoses. The barb-like rings on the cylindrical piece allow for an easy push-connection of flexible plastic or rubber tubing that is not easily disconnected. Hose barbs are used in machine perfusion and chemistry laboratory equipment. Hose barb fittings are small curved, bent or T-shaped pipes, hoses or tubes with hose barbs on at least one side used to join two or more pieces of piping (hosing, tubing) together.[1] Hose barbs are commonly used in the agriculture industry to connect anhydrous ammonia (NH3) hoses.[2]

See also

[edit]

References

[edit]
  1. ^ "An Introduction to Hose Barbed Fittings" (PDF). Brookhaven National Laboratory. Colder Products Company.
  2. ^ "NH3 (Anhydrous Ammonia) Hose Barbs". Continental NH3.


Stub icon

This article related to medical equipment is a stub. You can help Wikipedia by expanding it.

Stub icon

This chemistry-related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Hose_barb&oldid=1285579870"