Jump to content

Draft:David Jarvis

From Wikipedia, the free encyclopedia
  • Comment: Well done on creating the draft, and it may potentially meet the relevant requirements (including WP:GNG, WP:ANYBIO, WP:NPROF) but presently it is not clear that it does.
    As other reviewers have noted, Wikipedia's basic requirement for entry is that the subject is notable. Essentially subjects are presumed notable if they have received significant coverage in multiple published secondary sources that are reliable, intellectually independent of each other, and independent of the subject. To properly create such a draft page, please see the articles ‘Your First Article’, ‘Referencing for Beginners’ and ‘Easier Referencing for Beginners’.
    Please note that notability is established by reliable sources about the subject, not by the subject.
    Please note that many of the references would appear to be from sources that are NOT considered reliable for establishing notability and should be removed (including blogs, company websites, press releases, Twitter, YouTube, Instagram, Spotify etc).
    Please note that many of the references are not formatted correctly (see Introduction to referencing with VisualEditor and Wikipedia’s Manual of Style for help).
    Additionally, the draft tends to read too much like a promotional CV, which Wikipedia is not; and contains prose that is not of a standard appropriate for an encyclopaedia (also see WP:PEACOCK).
    Also, thank you for declaring your conflict of interest, that you are David Jarvis (see WP:AUTOBIO).
    Please familiarise yourself with these pages before amending the draft. If you feel you can meet these requirements, then please make the necessary amendments before resubmitting the page. It would help our volunteer reviewers by identifying, on the draft's talk page, the WP:THREE best sources that establish notability of the subject.
    It would also be helpful if you could please identify with specificity, exactly which criteria you believe the page meets (eg "I think the page now meets WP:NPROF criteria #3, because XXXXX").
    Once you have implemented these suggestions, you may also wish to leave a note for me on my talk page and I would be happy to reassess. Cabrils (talk) 05:20, 26 June 2025 (UTC)
  • Comment: You need to realize that these pages are often reviewed by notable academics. They are not going to be impressed by a long list of claims. These are WP:Peacock, and this article is full of puffery and WP:REFBOMBING. Cut the research description to 1/4 of what it is, add his Google Scholar profile. Whether he will pass WP:NPROF is unclear. Ldm1954 (talk) 12:24, 18 June 2025 (UTC)
  • Comment: Please rewrite or remove all content written in a promotional tone and remove the many unnecessary references. I don't think describing each paper or project in detail is due weight; for instance, the "European team that worked on 3D printing of metallic alloys" is only cited to primary sources, and thus should not be included unless mentioned in secondary sources as well. Toadspike [Talk] 16:30, 17 June 2025 (UTC)
  • Comment: Please dial back the WP:REFBOMBING. There is virtually never the need for more than one citation to support a given statement; two at the outside, if it's a particularly contentious one. Certainly not twenty. DoubleGrazing (talk) 13:05, 17 June 2025 (UTC)

David Jarvis PhD FIMMM (born 6 April 1975.[1]) is a British metallurgist, whose research and inventions within the aerospace and manufacturing sectors have been presented at international conferences[2][3] and discussed in policy-related forums[4][5]. He headed materials‑research sections at the European Space Agency from 2001 to 2016 and was elected an international member of the Royal Swedish Academy of Engineering Sciences (IVA) in 2012 for contributions to materials engineering[6].

Early life and education

[edit]

David Jarvis was born in Chatham, Kent, United Kingdom. He studied materials science and engineering at Swansea University, where he earned a PhD[7] in metallurgy and computational modelling in 2001, under the supervision of Prof. John Spittle and Professor Stephen G.R. Brown[8].

Career

[edit]

From 2001-2016, he worked at the European Space Agency (ESA) as Head of Sections for New Materials & Energy[9] and Strategic & Emerging Technologies[10], and currently works as the Director of VSCA[11] in Oslo, Norway.

From 2009-2014, Jarvis was an Expert Member of the European Science Foundation's (ESF) Materials Science and Engineering Expert Committee (MatSEEC)[12], providing technical input to Horizon2020 planning at the European Commission. He later founded and chaired Metallurgy Europe[13], a pan-European research program on metallurgy[14][15], which he presented at the European Parliament in Brussels in 2016[5].

Research and projects

[edit]

As a researcher, he is listed as inventor of 30 patent families[16][17][18] and has published research papers[19], related to additive manufacturing[20], intermetallics[21][22], metal combustion,[23][24] molten salts[25] and aluminium smelting[26].

Jarvis conceived and managed the IMPRESS Project[27] (Intermetallic Material Processing in relation to Earth and Space Solidification), which investigated novel TiAl and NiAl intermetallics, running from 2004-2009. This project developed new solidification technology for the investment casting of lightweight TiAl turbine blades and the gas atomization of NiAl catalytic powders[28][29].

In 2013, Jarvis initiated and managed the AMAZE Project[30] (Additive Manufacturing Aiming Towards Zero Waste and Efficient Production of High-Tech Metal Products), a European research project on 3D printing[31][32], involving numerous companies from the aerospace, nuclear fusion, automotive and energy sectors[33][34].

He also set up and ran the Accelerated Metallurgy Project,[35] a multi-partner European research project working on combinatorial material discovery that ran from 2011-2016[36]. Another European R&D project initiated by Jarvis in the 2010s is the ExoMet Project on light alloy nanocomposites[37], developing new high-strength magnesium and aluminium components for industry[38].

In March 2025, he published research at the TMS2025 Conference together with collaborators at UKAEA, presenting a new fusion shielding material, based on nanostructured tungsten boronitride, that is currently being radiation-tested for usage in the UK's nuclear fusion reactor[39].

Awards and honors

[edit]

In 2012, Jarvis was elected an International Member of the Royal Swedish Academy of Engineering Sciences (IVA) for his work in materials engineering[6][40].

In 2025, Jarvis was also recognized by The Minerals, Metals & Materials Society (TMS) in the US for the best paper award at TMS2024 in Orlando for research into environmentally sustainable aluminium smelting and he subsequently won the Light Metals Award at TMS2025 in Las Vegas[2]

Selected publications

[edit]
  • D.J. Jarvis et al., Metallurgy Europe - Science Position Paper, 2012, ISBN: 978-2-918428-74-9[41]
  • D.J. Jarvis, R.E. van den Blik-Jarvis, R.F.L. Mellor, A. Bjørseth: "Novel developments for inert anodes and wettable cathodes in aluminium electrolysis", Light Metals, 2024, 639-647[26]
  • T.O. Dunlop, D.J. Jarvis, W.E. Voice, J.H. Sullivan: "Stabilization of molten salt materials using metal chlorides for solar thermal storage", Nature - Scientific Reports, 2018, Vol 8, 8190[25]
  • B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, D.J. Jarvis: "A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components", Materials & Design, 2016, Vol 89, 559-567[20]
  • J.M. Bergthorson, S. Goroshin, M.J. Soo, P. Julien, J. Palecka, D.L. Frost, D.J. Jarvis: "Direct combustion of recyclable metal fuels for zero-carbon heat and power", Applied Energy, 2015, Vol 160, 368-382.[24]

References

[edit]
  1. ^ "FreeBMD - Images".
  2. ^ a b "TMS Light Metals Award - DJ Jarvis". www.tms.org. 2025.
  3. ^ "TMS-FEMS - DJ Jarvis".
  4. ^ "David Jarvis". www.globaloutlook.no.
  5. ^ a b "European Parliament - Metallurgy Europe - DJ Jarvis" (PDF).
  6. ^ a b "Ledamot". www.iva.se.
  7. ^ "PhD thesis".
  8. ^ Brown, S. G. R; Spittle, J. A; Jarvis, D. J; Walden-Bevan, R (2002-04-02). "Numerical determination of liquid flow permeabilities for equiaxed dendritic structures". Acta Materialia. 50 (6): 1559–1569. Bibcode:2002AcMat..50.1559B. doi:10.1016/S1359-6454(02)00014-9. ISSN 1359-6454.
  9. ^ "3D printing for space: the additive revolution". www.esa.int. Retrieved 2025-06-13.
  10. ^ "Prof. David Jarvis". www.esa.int. Retrieved 2025-06-12.
  11. ^ "VSCA | metals | Oslo Science Park, Gaustadalléen 21, 0349 Oslo, Norway". VSCA. Retrieved 2025-06-13.
  12. ^ "MatSEEC - DJ Jarvis". archives.esf.org. Retrieved 2025-06-12.
  13. ^ "Metallurgy Europe".
  14. ^ "Europe's new age of metals - DJ Jarvis". ASM International. 2014-09-18. Retrieved 2025-06-14.
  15. ^ "'Metallurgy Europe' – investing one billion euros into metals research and manufacturing - DJ Jarvis". www.esa.int. Retrieved 2025-06-14.
  16. ^ "Patents - ESA - DJ Jarvis".
  17. ^ "Patents - HIPtec - DJ Jarvis".
  18. ^ "Patents - VSCA - DJ Jarvis".
  19. ^ "ResearchGate - DJ Jarvis".
  20. ^ a b Szost, Blanka A.; Terzi, Sofiane; Martina, Filomeno; Boisselier, Didier; Prytuliak, Anastasiia; Pirling, Thilo; Hofmann, Michael; Jarvis, David J. (2016-01-05). "A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components". Materials & Design. 89: 559–567. doi:10.1016/j.matdes.2015.09.115. hdl:1826/14839. ISSN 0264-1275.
  21. ^ Jarvis, D. J.; Voss, D. (2005-12-15). "IMPRESS Integrated Project—An overview paper". Materials Science and Engineering: A. International Conference on Advances in Solidification Processes. 413–414: 583–591. doi:10.1016/j.msea.2005.09.066. ISSN 0921-5093.
  22. ^ Reinhart, G.; Iles, G. N.; McIntyre, G. J.; Fitch, A. N.; Jarvis, D. J. (2009-03-01). "An overview of the ESA-ESRF-ILL collaboration in the framework of the IMPRESS Integrated Project". MRS Online Proceedings Library. 1128 (1): 311. doi:10.1557/proc-1128-u03-11. ISSN 1946-4274.
  23. ^ "Could metal particles be the clean fuel of the future?". EurekAlert!. Retrieved 2025-06-14.
  24. ^ a b Bergthorson, J. M.; Goroshin, S.; Soo, M. J.; Julien, P.; Palecka, J.; Frost, D. L.; Jarvis, D. J. (2015-12-15). "Direct combustion of recyclable metal fuels for zero-carbon heat and power". Applied Energy. 160: 368–382. Bibcode:2015ApEn..160..368B. doi:10.1016/j.apenergy.2015.09.037. ISSN 0306-2619.
  25. ^ a b Dunlop, T. O.; Jarvis, D. J.; Voice, W. E.; Sullivan, J. H. (2018-05-29). "Stabilization of molten salt materials using metal chlorides for solar thermal storage". Scientific Reports. 8 (1): 8190. Bibcode:2018NatSR...8.8190D. doi:10.1038/s41598-018-26537-8. ISSN 2045-2322. PMC 5973930. PMID 29844342.
  26. ^ a b Jarvis, David J.; van den Blik-Jarvis, Rosanna E.; Mellor, Rosie F. L.; Bjørseth, Alf (2024). "Novel Developments for Inert Anodes and Wettable Cathodes in Aluminium Electrolysis". In Wagstaff, Samuel (ed.). Light Metals 2024. The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland. pp. 639–647. doi:10.1007/978-3-031-50308-5_82. ISBN 978-3-031-50308-5.
  27. ^ "IMPRESS Integrated Project - New industrial materials with the help of space research". www.esa.int. Retrieved 2025-06-12.
  28. ^ "EU-funded 'IMPRESS' takes materials science into space". SpaceNews. May 1, 2006.
  29. ^ "IMPRESS - DJ Jarvis" (PDF).
  30. ^ "Amaze project aims to take 3D printing 'into metal age'". BBC News. 2013-10-15. Retrieved 2025-06-12.
  31. ^ Agency, European Space. "Amazing future for 3D printing with ESA". phys.org. Retrieved 2025-06-14.
  32. ^ "BBC - DJ Jarvis". 15 October 2013.
  33. ^ eandtmagazine (2013-10-16). 3D printing metal in space with the European Space Agency's Amaze project. Retrieved 2025-06-12 – via YouTube.
  34. ^ Space com Staff (2013-10-21). "3D Printing Photos: Europe's Project AMAZE for Space Travel". Space. Retrieved 2025-06-12.
  35. ^ "AccMet - Jarvis" (PDF).
  36. ^ Thisdell2011-06-29T16:37:00+01:00, Dan. "ESA kicks off 'human genome project' of alloys". Flight Global. Retrieved 2025-06-14.{{cite web}}: CS1 maint: numeric names: authors list (link)
  37. ^ "News: Nanoparticles strengthen magnesium". www.hereon.de. Retrieved 2025-06-15.
  38. ^ Sillekens, W. H.; Jarvis, D. J.; Vorozhtsov, A.; Bojarevics, V.; Badini, C. F.; Pavese, M.; Terzi, S.; Salvo, L.; Katsarou, L.; Dieringa, H. (2014-07-01). "The ExoMet Project: EU/ESA Research on High-Performance Light-Metal Alloys and Nanocomposites". Metallurgical and Materials Transactions A. 45 (8): 3349–3361. Bibcode:2014MMTA...45.3349S. doi:10.1007/s11661-014-2321-2. ISSN 1543-1940.
  39. ^ "Tungsten Boride Shielding Material for Fusion Reactors". www.programmaster.org. Retrieved 2025-06-12.
  40. ^ Kungl. Ingenjörsvetenskapsakademien (IVA) (2024-10-25), Rosanna och David Jarvis, retrieved 2025-06-14
  41. ^ "Metallurgy Europe Paper - DJ Jarvis" (PDF).
Retrieved from "https://en.wikipedia.org/w/index.php?title=Draft:David_Jarvis&oldid=1297437926"